ARC SL-E

Chesterton ARC SL-E is a low-viscosity, 100% solids epoxy coating designed to protect concrete floors and traffic areas from mild chemical exposure and physical wear. Its mineral-reinforced formula offers excellent adhesion and can be applied to damp or dry surfaces using a roller, brush, squeegee, or sprayer. It can also be broadcast with aggregate for slip-resistant finishes.

Suitable for use in temperatures up to 200°F dry and 150°F wet, ARC SL-E is ideal for process floors, labs, locker rooms, ramps, and cleanrooms. It provides long-term protection and durability, replacing traditional tiles and coatings with minimal maintenance.

Not Sure What You’re Looking For? Contact Us

Product Features

✔ Surface modified mineral reinforcements
✔ Achieves strong adhesion to concrete
✔ Can be applied to dry or damp concrete
✔ Durable high performance coating
✔ 100% solids; no VOCs; no free isocyanates
✔ Protects new and old concrete subject to mild chemical and/or physical damage
✔ Replaces tiles, outlasts paints and other concrete coatings
✔ Apply by roller, brush, or squeegee

    • Process floor areas

    • Traffic aisles

    • Ramps

    • Clean rooms

    • Locker/shower room

    • Laboratories

  • 200 °F ( 93 °C )

  • 150 °F ( 52 °C )

  • 40 Mpa ( )

  • Red, Yellow, Light Gray, Dark Gray

  • Nominal, based on a 500 mm (20 mil) thickness

    • 11.3 liter kit covers 22.6 m2 (121.6 ft2)

    • 53 liter kit covers 106.00 m2 (1141 ft2)

    Note: Components are pre-measured and pre-weighed. Each kit includes mixing and application instructions.​​

Technical Data ↓

Not Sure What You’re Looking For? Contact Us