Products → ARC Industrial Coatings → Thin Film Composites for Concrete → ARC 797
ARC 797
Chesterton ARC 797 is a versatile, thin-film composite coating engineered to protect concrete surfaces from chemical attack and abrasion. Its low-viscosity formula enables easy brushing or flow application, delivering a seamless protective layer that resists a wide range of acids, alkalis, and solvents.
Ideal for secondary containment, pipe wrap areas, sumps, and spill zones, ARC 797 bonds strongly to sound concrete and aged overlays, providing durable, long-lasting protection in industrial environments with minimal thickness and application effort.
Not Sure What You’re Looking For? Contact Us
Product Features
✔ Apply by roller, brush, or airless spray
✔ Provides a proper surface for application of other ARC epoxy-based coatings for concrete
✔ Bonds to damp concrete
✔ Penetrates and seals concrete surface layer
✔ Low mixed viscosity
✔ 100% solids; low VOC's; no free isocyanates
✔ Can be applied to damp concrete
✔ Promotes strong adhesion to concrete
Technical Data ↓
-
As a primer:
Primarily for ARC 791 and 988
Secondarily for CS2 and CS4
As a sealer:
Concrete tanks
Secondary containment
Water intakes and dams
Sumps, drains and pits
Process floor areas
Pump bases
Equipment bases
-
93 °F ( 200 °C )
-
150 °F ( 66 °C )
-
3.4 Mpa ( )
-
Amber
-
Nominal, based on a 250 µm (10 mil) dft
On porous concrete surfaces a two-coat application may be required to provide sufficient film thickness on surface for adhesion of topcoats.16 liter kit covers 53.3 m2 (586.8 ft2).
Note: Components are pre-measured and pre-weighed. Each kit includes mixing and application instructions.