ARC S2
Chesterton ARC S2 is a durable, glass-reinforced novolac epoxy coating engineered to protect metal and concrete surfaces from severe corrosion, erosion, and chemical attack in harsh environments. With a 100% solids formulation, it forms a tough, impermeable barrier that resists permeation, thermal shock, solvents, and continuous temperatures up to 175°F dry and 140°F wet.
Designed for demanding industrial use, ARC S2 applies easily by spray, brush, roller, or squeegee in a single high-build coat. It adheres strongly to both well-prepared and marginal surfaces, making it ideal for pipelines, tanks, valves, separators, and dryer hoods in chemical plants, offshore platforms, and wastewater systems—extending equipment life and minimizing maintenance downtime.
Not Sure What You’re Looking For? Contact Us
Product Features
✔ Sprayable viscosity for rapid installation
✔ Spark testable for pinhole-free verification
✔ Extends equipment life
✔ Improves fluid flow efficiency
✔ Two-coat system
✔ Applied via conventional airless spray systems, brush, or roller
✔ Wet film thickness of 0.25 – 0.5 mm (10 – 20 mils) per coat
-
Flue gas ducts
Heat exchangers
Quench zones
Flue gas particulate filters
Chemical reactors
Chemical storage and process tanks
-
175 °F ( 80 °C )
-
125 °F ( 52 °C )
-
45.5 Mpa ( )
-
20000 hours
-
Gray, Green
-
Nominal, based on 375 μm (15 mil)
1125 ml cartridge covers 3.00 m2 (32.29 ft2)
1.5 liter kit covers 3.94 m2 (42.4 ft2)
5 liter kit covers 13.33 m2 (143.52 ft2)
16 liter kit covers 42.67 m2 (459.26 ft2)
Note: Components are pre-measured and pre-weighed. Each kit includes mixing and application instructions. 1.5 liter and 5 liter kits include tools.