ARC S1HB
Chesterton ARC S1HB is a high-build, 100% solids mineral-reinforced epoxy coating designed to protect metal and concrete from corrosion and chemical attack. Its thick, single-coat application covers rough surfaces and sharp edges easily and bonds well to damp or lightly prepared areas.
Ideal for storage tanks, pipelines, wastewater clarifiers, and manholes, ARC S1HB includes a fluorescent pigment for quick quality checks during application. It’s compatible with cathodic protection and allows spark testing for reliable, long-lasting protection.
Not Sure What You’re Looking For? Contact Us
Product Features
✔ Low VOCs
✔ 100% solids
✔ Greater than 70% edge retention
✔ Provides excellent barrier protection against corrosion and chemical attack
✔ Provides resistance to erosive flow
✔ High build (1 – 2 mm/ 40 – 80 mils) coating designed for rough surfaces
✔ Easily applied by heated plural component spray with brush application for touch-up
✔ UV sensitive pigment for QC inspection
-
Crude oil storage tanks
Chemical storage tanks
Thickener tanks
Pipelines/penstocks
Wastewater clarifiers
Grit chambers
Wet wells/junction boxes
Manholes
Acceptable for use with cathodic protection systems
-
175 °F ( 80 °C )
-
125 °F ( 52 °C )
-
2.7 Mpa ( )
-
10000 minutes
-
Light Gray
-
ARC S1HB: Nominal, based on a 750 µm (30 mil) DFT
1125 ml cartridge covers 1.5m2(16.1 ft2)
60 liter kit covers 80 m2(850 ft2)
600 liter kit covers 800 m2 (8500 ft2)
Note: Each kit is comprised of two equal size units of Part A and one equal size unit of Part B