ARC MX 1
Chesterton ARC MX1 is a 100% solids, ceramic-reinforced epoxy composite designed to protect metal surfaces from severe abrasion and impact caused by medium to coarse particles. Its tough polymer matrix provides excellent wear resistance and durability in harsh conditions.
Applied by trowel at a minimum 6 mm thickness, ARC MX1 is ideal for equipment like pulverizers, slurry pipelines, dredge pumps, and fan housings. It withstands dry temperatures up to 400°F and wet conditions up to 205°F, offering a longer-lasting alternative to rubber linings and ceramic tiles.
Not Sure What You’re Looking For? Contact Us
Product Features
✔ Replaces hard alloy blends as wear-resistant material
✔ Easily apply by trowel
✔ Restores worn equipment to near original condition
✔ Protects surfaces against dry coarse particle erosion, wet slurry abrasion, and impact
✔ Provides a longer lasting alternative to rubber linings and ceramic wear tiles
✔ >90% by weight ceramic reinforcement
✔ 100% solids; no VOCs; no free isocyanates
✔ Novel toughened polymer matrix for improved impact resistance
-
Pulverizers
Dredge pumps
Hoppers and silos
Conveyor screws
Pumps and pipe elbows
Fans/blowers/cyclones
Slurry pipelines and pumps
Ceramic tile deflector hoods
Fan housings
Ceramic tile-lined chutes
Rubber-lined deflector hoods
-
400 °F ( 205 °C )
-
205 °F ( 95 °C )
-
22.1 Mpa ( )
-
Blue
-
Nominal, based on a 6 mm (240 mil) thickness
6 kg kit covers 0.37 m2 (3.97 ft2)
Contains:1 x MXP (primer) part A and B
1 x MX1 (top coat) part A and B
1 x MX (ceramic reinforcement) part C
20 kg kit covers 1.23 m2 (13.23 ft2)Contains:
1 x MXP (primer) part A and B
1 x MX1 (top coat) part A and B
1 x MX (ceramic reinforcement) part C
Note: Components are pre-measured and pre-weighed. Each kit includes mixing and application instructions plus tools.