ARC I BX1
Chesterton ARC I BX1 is a high-performance, ceramic-reinforced epoxy composite designed to protect metal surfaces from severe sliding abrasion and impact. Its urethane-modified, amine-cured formulation offers exceptional impact resistance and high volumetric ceramic particle loading, making it ideal for equipment exposed to rapid vibration or coarse particle wear.
Applied by trowel or plastic applicator at a minimum thickness of 6 mm (1/4"), ARC I BX1 is suitable for use in hoppers, chutes, slurry pumps, pipe elbows, pneumatic conveyors, and pulverizers. It withstands dry temperatures up to 400°F (205°C) and wet conditions up to 205°F (95°C), with a tensile adhesion strength of 21.9 MPa. Each pre-measured kit includes mixing and application instructions, plus tools, and covers approximately 1.4 m² (15 ft²) at the recommended thickness.
Not Sure What You’re Looking For? Contact Us
Product Features
✔ Extends equipment life
✔ Improves safety by reducing hotwork
✔ Simplifies maintenance procedures
✔ Reduces the need for spare parts
✔ High impact resistance
✔ High volumetric ceramic particle loading
✔ Applied by trowel or plastic applicator tool
✔ Applied at minimum thickness of 6 mm (1/4") or more
-
Hoppers and chutes
Slurry pumps
Pipes and pipe elbows
Pneumatic conveyors
Pulverizers and impact zones
-
400 °F ( 205 °C )
-
205 °F ( 95 °C )
-
21.9 Mpa ( )
-
Gray
-
Nominal, based on a 6 mm (240 mil) thickness
20 kg kit covers 1.4 m2 (15 ft2)
Contains nesting insert with Part B Curing agent on top, integrated with part A resin below, in a re-sealable, crimped container.
Note: Components are pre-measured and pre-weighed. Each kit includes mixing and application instructions plus tools.